Ever wondered how the reverse osmosis systems work? Yes. Like any other water filtration system, these systems too come with a specific set of working mechanism. Apparently, the entire idea of using and operating a reverse osmosis system might seem quite confusing and difficult. However, in reality, the high pressure pump driven RO systems have been used for numerous years in order to purify and desalinate water. Once you have a better and fuller understanding of how the reverse osmosis system works, you will soon be able to understand the technology of this system better. On top of that, you will also be able to use this product better. Keep reading for a fuller and complete insight on the working mechanism of a reverse osmosis system.
Working mechanism of a RO membrane
The Reverse osmosis membrane has a particular working mechanism and it adheres by this mechanism to come up with the best and the highest grade of water. In this system, the dissolved inorganic solids are eventually removed from water after rigorous processing and checks. This happens when the household water pressure pushes the tap water with the help of a semi-permeable membrane. This membrane which is merely as thick as the cellophane paper, allows only pure water to pass through it. The contaminants and impurities are rejected right away and are eventually flushed down in the drain.
The different components of a reverse osmosis system
Cold water Line Valve– Every reverse osmosis system comes with a cold water line valve that fits along the water supply line of the cold water. This is the main source of water for the RO.
Pre-filters– Water passes from the cold water supply to the reverse osmosis pre filter which is also one of the most common sediment filters of the system. This filter is used for removing sand, silt dirt and similar other sediments. On top of that, carbon filters may also be added for removing chlorine which again has a bad effect on the TFC film.
RO membrane– The RO membrane is one of the most significant elements of the system. This membrane rejects the deadly contaminants and ensures that pure water passes through it.
The Post Filter– Right after leaving the RO storage tank and just before entering the RO faucet, the processed water passes through the post filters which removes every possible bad taste and odor from the water.
The SOV– Popularly known as the Automatic Shut off Valve, the SOV is a unit which is used for the conservation of water. Right after the storage tank is completely full; his valve prevents any other water from entering the RO membrane by shutting off the water flow.
Flow restrictor– Every reverse osmosis filtration system also comes with a flow restrictor which regulates the water flow and maintains a proper flow rate to obtain the best and the highest grade of drinking water.
Storage Tank– The regular RO storage tank can hold up to 2.5 gallons of water. A bladder inside the tank will keep the water pressurized till it’s full.
Every reverse osmosis filtration system comes with these components that effectively assist in its working. So now that you know everything about this system, go for one today and enjoy the best range of high-grade water.